Achieving home improvement projects on your own is a satisfying accomplishment, but there are certain tasks that you should leave to the professionals. AC repair is one of them.
To check whether your AC breaker is tripped, go to your electrical panel and flip it back on. If it immediately shuts off again, call a professional right away. Contact AC Repair Round Rock now!
1. Clogged Drain Line

A clogged drain line is a common AC repair issue that can lead to water damage. Air conditioners need a drain line to expel excess condensation that accumulates in the drain pan. Over time, a clogged drain line can cause water to back up into the system and circulate throughout the evaporator coils and air handler. This can result in musty smells and mold growth in the ductwork and other areas of the home. Fortunately, this problem can be prevented with proper maintenance and regular cleaning of the drain line.
Before performing an AC drain line repair, turn off your unit’s power. This will prevent the unit from accidentally restarting during the repair process and causing further damage. Next, locate the access point for your drain line. This is typically located near the outdoor condenser unit or the indoor air handler. Using gloves, remove the access cap and inspect the pipe for signs of a clog. If you find a clog, it’s best to use a snake to clear it.
If you don’t have a snake, try using a wire brush to clear the clog. You can also pour a mixture of vinegar and water into the drain line to break down any debris. Once the clog is cleared, replace the access cap and switch your unit on.
2. Faulty Circuit Board
Circuit boards are essential components of the modern electronic equipment that everyone uses in their daily life. They are extremely sensitive to power overload and other environmental factors, making them prone to malfunctions. However, a faulty circuit board can be repaired with the right troubleshooting techniques.
The first thing to check for is physical damage. This can include scratches, cracks, or misplaced solder connections. In addition, it is important to check for signs of overheating. The best way to do this is by a visual inspection. It is also a good idea to connect the circuit board pack to a power source and perform a continuity test with a multimeter.
Once the circuit board is clean and free of any damage, it is time to repair it. First, locate the location of the faulty component. Next, carefully desolder the old component and remove it from the circuit board. Then, replace it with a new one that has the same specifications as the original component. After resoldering the component, apply masking tape to protect it from future damage. Finally, solder the new lead to the pad and trim off any excess tape with a pair of scissors or a craft knife.
It is important to remember that not all circuit board problems can be fixed with simple repair techniques. Some problems are so severe that they may require the replacement of the entire circuit board. For this reason, it is crucial to schedule regular inspections and maintenance with professional HVAC technicians. These experts have the knowledge and experience to identify any potential issues before they turn into major repairs. In addition, they can offer effective solutions to address them quickly and efficiently.
3. Faulty Compressor
The compressor converts the refrigerant into cool air that circulates through your home. If it isn’t working properly, your AC will not be able to create cold air. There are a number of reasons why your compressor might not be working, including electrical problems and other mechanical issues.
If your AC is sputtering or making strange noises when you turn it on, these are signs of a compressor problem. You should also check the evaporator coil for dirt and debris that can block air flow and cause overheating. The pressure sensors in your air conditioning system may also be faulty. These sensors help the compressor control its output based on refrigerant levels. If they aren’t functioning correctly, the compressor will work harder to make up for it. This will put unnecessary strain on the system and could cause it to fail.
Another reason your compressor might not be working is that it might have been damaged or worn out from age and use. You can minimize this risk by doing routine preventative maintenance on your system, including cleaning the evaporator coil and changing the air filters. Skipping these routine maintenance tasks can allow dirt and debris to clog the coil, which will force the compressor to work harder. It can also sabotage the compressor’s internal lubrication system, which can speed up the wearing out of its parts.
If you have a physical problem with the compressor, like leaks or visible damage, you should call a professional for an evaluation and repair. A clunk or chattering sound when you activate your AC’s clutch is another sign that the compressor is struggling to start. This could be due to a bad relay switch that can easily be fixed by a professional.
4. Faulty Fan
The fan is an essential component of your AC system. It provides electricity to the compressor and condenser coils so they can transfer heat and produce cool air. If the fan is faulty, the entire cooling process can be impacted.
Luckily, this is generally an easy problem to resolve. Often, the problem simply means the fan motor is overheating or has burnt out. This typically occurs due to a lack of maintenance on the unit and can be fairly costly to repair.
In some cases, the problem may be as simple as a blown fuse. If you suspect this, head over to your circuit breaker box and flip the switch back on. However, be careful – if you don’t feel comfortable around your breaker box or aren’t sure what to do, be sure to call an electrical or HVAC specialist that can come and sort out the issue safely.
If you hear a squealing sound, this is often a sign that the fan belt is wearing out and needs replacing. The squealing sound may come and go, but you’ll want to get this fixed sooner rather than later as it can lead to the failure of the belt and a non-working AC system.
If you notice a musty smell, it could be a sign that there is mold or mildew in your unit or in the ductwork. A professional will be able to clean and disinfect the system and restore it to working order. They can also advise you on preventative maintenance to keep these issues at bay. Be sure to turn off the power before inspecting or repairing your AC unit. This is always best left to a qualified technician.
5. Faulty Filters
Air filters keep dirt and debris from clogging your home’s ductwork, and they help to ensure that your AC system is working properly. Filters should be changed or cleaned every one to three months, depending on the type of filter and your home’s environment.
A clogged or dirty air filter restricts the flow of cool air, so make sure to check your filter and clean it regularly. You should also avoid closing vents in rooms that you don’t use often to save money – this can create more issues for your AC!
If your AC unit is running but blowing warm air, there could be an issue with the compressor or a refrigerant leak. In this case, you should contact a professional for AC repair.
Faulty switches can cause your ac to cycle on and off constantly. This can lead to expensive damage if not repaired promptly. To avoid these problems, make sure to change your filter regularly, and turn your thermostat up in the summer and down during the winter.
Faulty sensors can also cause your ac to malfunction. This can lead to overheating, which is extremely dangerous for your system and your home. A professional should inspect the problem and diagnose it to determine what is causing the malfunction. Whether it is a faulty sensor or a faulty thermostat, an experienced technician can help you get your ac repair done quickly and efficiently.